4
1 Introduction
Overview
The Enerpac W-Series hydraulic torque
wrench is designed for controlled
tightening and loosening of fasteners
in industrial bolting applications. The
W-Series features a low profile cassette,
compact drive unit and integrated reaction
foot, making it ideal for use in locations
where workspace is limited.
Interchangeable W-Series UltraSlim
cassettes are available in an assortment
of popular sizes to suit specific customer
requirements.
An optional TSP Pro Series Swivel
provides 360 degree X-axis and 160
degree Y-axis rotation, allowing easier
positioning of the wrench and hoses in
confined areas.
The W-Series can be used with a wide
range of Enerpac bolting pumps. Electric,
air and hand style pumps are available
(sold separately).
Delivery Instructions
Upon delivery all components must be
inspected for damage incurred during
shipping. If damage is found the carrier
should be notified at once. Shipping
damage is not covered by the Enerpac
warranty.
Warranty
• Enerpac guarantees the product only for
the purpose for which is intended.
• All Enerpac products are guaranteed
against defects in workmanship and
materials for as long as you own them.
Any misuse or alteration invalidates the
warranty.
• Observe all instructions as
communicated in this manual.
• When replacement parts are needed, use
only genuine Enerpac replacement parts.
EU Declaration of Incorporation
• W2000SL • W4000SL
These tools conform with the
requirements for CE Marking.
Enerpac declares that the W-Series
models listed above meet the applicable
standards and directives issued by the
European Union.
For additional details, refer to the separate
EU Declaration of Incorporation.
2 Safety
Read all instructions carefully. Follow all
recommended safety precautions to avoid
personal injury as well as damage to the
wrench and/or damage to other property.
Enerpac cannot be responsible for any
damage or injury from unsafe use, lack of
maintenance or incorrect operation. Do not
remove warning labels, tags, or decals.
In the event any questions or concerns
arise, contact Enerpac or a local Enerpac
distributor for clarification.
If you have never been trained on high-
pressure hydraulic safety, consult your
distributor or service center for a free
Enerpac Hydraulic Safety Course.
This manual follows a system of safety
alert symbols, signal words and safety
messages to warn the user of specific
hazards. Failure to comply with these
warnings could result in death or serious
personal injury, as well as damage to the
equipment or other property.
The Safety Alert Symbol appears
throughout this manual. It is used
to alert you to potential physical
injury hazards. Pay close attention to
Safety Alert Symbols and obey all safety
messages that follow this symbol to avoid
the possibility of death or serious personal
injury.
ENGLISH
To Next Page
Loading...
Need help?
General
