Need help?Do you have a question about the EnGenius EWS7928P and is the answer not in the manual?
General| Model | EWS7928P |
|---|---|
| Primary Ports | 24 x 10/100/1000BASE-T |
| PoE | Yes |
| Switching Capacity | 128 Gbps |
| MAC Address Table Size | 16K |
| Management | Web, CLI, SNMP |
| Operating Humidity | 10% to 90% non-condensing |
| Type | Managed |
| Uplink Ports | 4 x 1G/10G SFP+ |
| Jumbo Frame Support | Yes |
| VLAN | IEEE 802.1Q |
| Layer | Layer 2+ |
| Power Supply | 100-240V AC, 50/60 Hz |
| Operating Temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Forwarding Rate | 95.23 Mpps |
Introduces the switch's purpose, features, and lists package contents.
Details technical specifications for different switch models.
Illustrates switch models' front and back views with ports and indicators.
Lists EnGenius Access Point models supported by the EWS switch.
Explains the embedded web interface for device monitoring and management.
Guides on connecting the switch to a network with or without DHCP.
Details accessing the switch's management interface via web browser.
Describes the switch's dual role as a wireless controller and Layer 2 PoE switch.
Covers system info, controller state, and managed access point status.
Displays AP status and guides on adding APs to the controller's list.
Explains creating and managing AP groups for unified network management.
Provides Topology View, Map View, and Floor View for network visualization.
Offers overview of network traffic for access points and client activity.
Covers essential maintenance tasks like SSL certificate management and firmware updates.
Manages core switch settings: System, L2 Features, VLAN, ACL, QoS, Security, Monitoring, Diagnostics.
Configures port speed, duplex mode, and flow control for optimal network performance.
Manages Power over Ethernet features like power budget and port settings.
Covers advanced Layer 2 features: Link Aggregation, STP, IGMP/MLD Snooping.
Enables logical network segmentation into broadcast domains via VLANs.
Implements priority queuing and traffic management for improved data delivery.
Secures network access via 802.1X, Radius server, and DoS protection.
Guides on upgrading firmware and resetting the device to factory defaults.
Procedures for rebooting the switch and logging out of the user interface.
To Next Page
