To Next PageTo Next Page
Need help?Do you have a question about the England's Stove Works 55-SHP10 and is the answer not in the manual?
General| Type | Pellet Stove |
|---|---|
| Fuel Type | Wood Pellets |
| Efficiency | 85% |
| Burn Time | Up to 60 hours |
| Ignition | Automatic |
| Venting | 3" or 4" venting options |
Contains critical safety instructions regarding installation and operation of the pellet stove.
Details heating performance parameters such as burn rate and square footage heated.
Details emissions standards and safety compliance certifications for the unit.
Addresses potential draft issues caused by central heating systems.
Crucial procedure for handling smoke-back incidents, including safety steps.
Details the mandatory requirement for an outside air intake for proper operation.
Specifies requirements for floor and wall protection during installation.
Covers handle attachment, power connection, and the mandatory initial 20-minute dry run test.
Details the type and installation specifications for pellet vent pipe.
Explains the procedures for venting the unit through a wall.
Provides instructions for venting the stove through a ceiling.
Guidelines for connecting the stove to an existing chimney flue.
Details the mandatory outside air intake connection and its specifications.
Specific requirements and precautions for installing the stove in a mobile home.
Details non-combustible floor covering specifications and dimensions.
Details required wall clearances and protection for combustible materials.
Lists specific minimum clearances for various vent termination points.
Step-by-step guide for starting the unit, including dry run and pellet loading.
Explains the automatic start sequence and procedures for manual ignition.
Lists and explains various error codes displayed by the control board.
Instructions for safely turning off the unit, avoiding unplugging.
Guidance on refueling, and procedures for power interruptions.
Steps for fuel outage and response to combustion blower failure.
Routine cleaning procedures for the burn pot area and ash storage.
Provides instructions for the safe disposal of ashes.
Details tasks for monthly ash removal and annual comprehensive cleaning.
Information on fly ash formation and its impact on the venting system.
Procedures for removing rear panels, augers, and blowers for service.
Explains the role of vacuum switches in unit operation and safety.
Details maintenance of the port for the door-ajar vacuum switch.
Information on the hopper lid switch and critical gasket maintenance.
Guidance on maintaining the stove's finish and caring for the glass.
Description of the digital control board, its display, and adjustable settings.
A specific safety warning regarding operating the stove with doors open.
Step-by-step guide for adjusting hopper lid latch tension for a proper seal.
Instructions for installing optional wall thermostats and decorative trim kits.
Lists available replacement parts for the stove.
Lists available accessories that can be added to the unit.
Lists common operational issues and their corresponding troubleshooting steps.
Essential fire prevention measures and safety guidelines.
Guidelines for freestanding installation, including clearances and floor protection.
Details the warranty duration, scope, and conditions for coverage.
Outlines the process for making a warranty claim and registering the product.
Required fields for registering the product for warranty purposes.
Methods and deadlines for submitting the warranty registration.
How correct installation impacts the unit's emissions performance.
Guidance on venting for optimal emissions and safe operation.
Guidelines for assembling venting systems, including pipe compatibility.
Specific rules for vent exit points based on NFPA standards and building codes.
Emphasizes the requirement for outside combustion air and its function.
Guidelines for using alternative materials for the outside air connection.
Tips for optimal daily use, fuel quality, and storage.
Lists fuels that must not be burned due to safety and performance reasons.
How to adjust heat output and convection blower speed via the control board.
Instructions for starting/shutting down and a warning about door closure.
References to sections on ash removal and critical part replacement.
Recommendations for smoke detectors, compliance, and tamper warnings.
Information regarding product warranty and procedures.
