5.4 Turning on/off lights
Long press the to make the controller turn on the lights and the display backlight becomes dim. Long press again to make the controller
turn off the lights and the backlight restore brightness.
5.5 Assist level selection
Press / to switch PAS level of electric bicycle, thus changing the motor output power.
5.6 Battery level display
The Battery level is shown as 5 bars. When the battery is full charged, all of the 5 bars lighten up. When the battery is fully depleted,
the bar begin to flash, warning the user to charge the battery as soon as possible.
Full power 4 bars power 3 bars power 2 bars power 1 bar power
Empty power flashing
Display Instructions
15
To Next Page