What to do if my ENJI PRIME Dice Camera Security Camera doesn’t record video after booting?
If the ENJI PRIME Security Camera doesn’t record video after booting, ensure a Micro SD card is inserted. If it is, format the card using a computer, and then re-insert it into the device.
Why doesn't my ENJI PRIME Dice Camera turn on or boot?
If your ENJI PRIME Security Camera doesn’t boot or turn off after booting, it's possibly due to a low battery. Please charge the device for 2 hours and then try booting it again.
What to do if ENJI PRIME Dice Camera Security Camera doesn’t response when charging?
If the ENJI PRIME Security Camera doesn’t respond when charging, try replacing the USB data cable or charger. Alternatively, connect the camera directly to a computer.
Details on the camera's video resolution, recording capabilities, battery life, and memory card support.
Identification of the camera's components including lens, buttons, USB port, and card slot.
Instructions for charging the camera's built-in battery and LED indicator status.
Steps to turn on the camera and start video recording with SD card insertion.
Procedure to start and stop 1080P video recording, including sequence length.
How to activate and use motion detection for automatic recording.
Instructions for activating and deactivating the night vision infrared LEDs.
Guidance on connecting the camera to a computer for video playback.
Steps to reset the camera using the reset button when it is not functioning.
Instructions for setting the date and time to be displayed on video/photos.
Solutions for common issues like failure to boot, record, or display video.
General| Brand | ENJI PRIME |
|---|---|
| Model | Dice Camera |
| Category | Security Camera |
| Language | English |
To Next Page