Need help?Do you have a question about the ENKHO 149800 .01 and is the answer not in the manual?
General| Brand | ENKHO |
|---|---|
| Model | 149800 .01 |
| Category | Cordless Saw |
| Language | English |
Explains hazard symbols like electrical voltage, hot surface, sharp objects, and hand injuries.
Defines signal words like Warning, Caution, Note, and icons like Info and Follow the manual.
Details necessary PPE like hearing protection, safety glasses, mask, and clothing.
Emphasizes keeping the work area clean, well-lit, and free from explosive atmospheres.
Covers plug matching, avoiding earthed surfaces, and protection against rain/wet conditions.
Stresses alertness, common sense, using PPE, and preventing unintentional starts.
Advises on not forcing the tool, proper switch function, and disconnecting power before adjustments.
Covers charger compatibility, using correct battery packs, and handling abusive conditions.
Recommends qualified repair persons and using identical replacement parts for safety.
Warns about cutting live wires, using detection equipment, and vibrations.
Covers securing workpieces, blade insertion, keeping hands clear, and blade care.
Warns not to stare at the LED light as it can be harmful to eyes.
Details safe usage for children, cord replacement, and compatible charger/battery.
States batteries need ventilation during charging and proper storage conditions.
Defines the intended use (wood, plastic, metal cuts) and prohibited uses (glass, stone).
Reiterates PPE like hearing protection, eye protection, mask, gloves, and clothing.
Highlights risks like electrical voltage, explosive substances, hot surfaces, and hand injuries.
Details adjustable pendulum action, anti-splinter guard, tool-free blade exchange, and LED work light.
Lists numbered parts of the device like start lock, on/off switch, base plate, and quick charger.
Lists all items included in the package, e.g., jig saw, rip fence, blades, battery, charger.
Provides model, speed, cutting angles, weight, battery type, voltage, capacity, and charger details.
Details sound pressure/power levels and declared vibration values according to EN 60745.
Explains how to safely transport the device, including removing the battery and using the case.
Covers special requirements for shipping Li-ion batteries by third parties.
Advises on storing the device and batteries in a dry, temperature-controlled environment, protected from dust.
Instructs to unpack the device and check the contents for completeness and damage.
Details how to charge the battery, including LED indicators and temperature limits.
Explains attaching/detaching battery and checking charge level via LED indicator.
Instructions for attaching the rip fence to either side of the device for straight cuts.
Explains how to set the pendulum action levels (0-3) for different cutting speeds and finishes.
Describes the procedure to start and stop the jig saw, including using the start lock.
Provides step-by-step instructions for removing and inserting saw blades using the quick-release chuck.
Explains how to attach or detach the sliding block for surface protection.
Details how to install or remove the anti-splinter guard for tear-free cuts.
Guides on setting the base plate for various cutting angles (0°, 15°, 30°, 45°) using locking screws.
Explains how to switch between blowing off splinters or using a vacuum cleaner.
Details how to connect a vacuum cleaner for dust removal using the adapter.
Outlines safe steps to shut down the device, including unplugging and removing the battery.
Warns to only use specified accessories to avoid injury risks.
Lists available accessories such as saw blade sets for wood and metal, and spare batteries.
Provides steps to troubleshoot battery charging problems, checking connections and charger.
Guides on resolving issues where the device fails to start, checking battery power and connections.
Addresses loose saw blades and insufficient cutting performance, checking settings and blade condition.
Lists safety precautions before performing maintenance, like switching off and removing the battery.
Warns about electrical voltage and that internal maintenance must be done by specialists.
Details how to clean the device with a damp cloth, dry it, and keep terminals and vents clean.
Explains the symbol for waste electrical equipment and where to find collection points for recycling.
Covers EU regulations for disposing of batteries and accumulators separately from domestic waste.
States the 3-year warranty period and the need for an original receipt as proof of purchase.
Lists conditions that void the warranty, such as damage from improper use or maintenance.
Declares compliance with EC Machinery Directive 2006/42/EC for the product's development and production.
Lists the harmonised standards the product complies with, e.g., EN ISO 12100, EN 60745.
Provides details of the manufacturer (SPINservice S.r.I.) and contact information.
To Next Page