SETTING UP YOUR EBIKE 8BILLY EBIKE USER MANUAL
To install the right pedal, nd the pedal labelled “R” and
place one of the supplied washers on.
Next, locate the right side crank and attach the pedal to
the arm by threading in a clockwise motion.
To install the left side pedal, locate the pedal labelled
“L”, install the other supplied washer, then attach to the
left side crank arm by threading in an anti-clockwise
motion.
Your Billy ebike ships with the pedals detached.
Each pedal is labelled according to the side of the bike
they belong on. “R” for right, and “L” for left.
2. FOLDING PEDALS
READ PEDAL LABELS CAREFULLY TO
AVOID ATTEMPTED INSTALLATION OF
INCORRECT PEDALS AND DAMAGING
COMPONENTS.
To Next Page
Loading...
