HCS EVSE User Manual
4
ILLUSTRATIONS
Figures
1. Front Panel ....................................................................................................11
2. Drape the Charge Cable Loosely Around the HCS Enclosure ...................... 12
3. 220/240V Single Phase .................................................................................15
4. 208V 3-Phase, Wye-Connected ..................................................................... 16
5. 240V 3-Phase, Delta-Connected, with Center-Tap on One Leg....................16
6. Wiring the EVSE in a Junction Box ..............................................................18
7. Preferred Orientation of the NEMA Receptacles Below the Plug-in HCS ...19
8. Mounting the EVSE to a Hollow-Wall ..........................................................23
9. Mounting the EVSE to a Solid-Wall .............................................................24
10. Mounting the SAE J1772 Connector Holster Using the Exterior
Wood Screws and Washers ............................................................................26
11. Locking the SAE J1772 Connector with Padlock Included .......................... 27
12. Charge Connector Secured with Padlock which Cannot be Removed
from Vehicle without Key .............................................................................27
13. Padlock Used in Combination with Connector Holster After Charging .......27
14. Enclosure Dimensions ................................................................................... 33
Tables
1. Front Panel LED Information........................................................................11
2. Service Connections for HCS by Model .......................................................13
To Next Page
Loading...
Need help?
General