The ENSON HDMI Extender over Ethernet (ENS-HE8200T) is a device designed to extend HDMI signals over long distances using standard UTP Cat5e/6 cables. It supports various network configurations, including point-to-point, point-to-many, and many-to-many, making it suitable for a wide range of applications. The system consists of a Transmitter (TX) and a Receiver (RX) unit, both equipped with HDMI and Ethernet ports, along with IR control capabilities.
Function Description
The primary function of the HDMI Extender is to transmit high-definition HDMI video and audio signals, along with IR control signals, over an Ethernet network. This allows for flexible placement of HDMI sources and displays, overcoming the distance limitations of traditional HDMI cables. The device utilizes TCP/IP protocol for signal transmission, enabling it to integrate seamlessly into existing network infrastructures.
In a point-to-point setup, a single Transmitter connects to a single Receiver via a Cat5e/6 cable, extending the HDMI signal up to 120 meters. For more complex installations, the system can be configured for point-to-many, where one Transmitter sends signals to multiple Receivers, or many-to-many, where multiple Transmitters send signals to multiple Receivers. These multi-device configurations typically require an Ethernet switch or router. The system is HDCP compliant, ensuring compatibility with protected content. It also supports wideband IR (38-56kHz) control, allowing users to control the HDMI source device from the display location using their existing remote control. The units are designed with mounting ears for easy installation.
Important Technical Specifications
- Operating Temperature Range: -5 to +35°C (+23 to +95°F)
- Operating Humidity Range: 5 to 90%RH (No Condensation)
- Input Video Signal: 0.5-1.0 Volts P-P
- Input DDC Signal: 5 volts p-p(TTL)
- Support Video Format: DTV/HDTV: 480i/576i/480P/576P/720P/1080i/1080P
- Video Output: HDMI
- Transmission Distance: 1080P 8-bit 120m (Maximum) over single CAT5E/6 /24AWG/Solid cable
- Power Consumption: TX: 3 watts; RX: 3 watts (Maximum)
- IR Frequency: 38kHz-56kHz
- Dimension (L×W×H): 103.5 x 93.5 x 24.6 mm
- Net Weight: Receiver: 220g, Transmitter: 220g
- Default IP Address (TX): 192.168.168.55
- MAC Address (TX): 00:0b:78:00:60:01
- Default IP Address (RX): 192.168.168.56
- MAC Address (RX): 00:0b:78:00:60:02
Usage Features
The ENSON HDMI Extender offers several features that enhance its usability and flexibility:
- Extended Range: Capable of extending 1080p HDMI signals up to 120 meters (approximately 394 feet) using a single Cat5e/6 cable, significantly surpassing the typical limits of HDMI cables.
- Network Configuration Versatility: Supports point-to-point, point-to-many, and many-to-many network configurations. This allows for scalable installations, from simple extensions to complex distributed video systems.
- Cascading Capability: The system can be cascaded for many layers by adding more Ethernet switches, enabling even longer transmission distances and more extensive distribution networks.
- IR Control: Includes wideband IR (38-56kHz) control, allowing users to control the HDMI source device (e.g., DVD player, STB) from the remote display location using their standard IR remote. The IR-TX cable connects to the source's IR window, and the IR-RX cable receives signals from the remote control at the display end.
- TCP/IP Protocol Support: Operates on TCP/IP, making it compatible with standard network equipment and allowing for potential integration into IP-based control systems.
- Web Browser IP Setup: Both the Transmitter and Receiver units have an embedded HTTP server, allowing users to set up and configure their IP addresses via a web browser. This is particularly useful in multi-device setups where unique IP addresses are required for each unit.
- Status Indicators: Both TX and RX units feature LED indicators for power input and signal connection status, providing visual feedback on the device's operational state.
- Reset Button: A reset button is included on both units to restore factory default settings if needed.
- Mounting Ears: Equipped with mounting ears for secure and convenient installation in various environments.
Connecting and Operating:
- Connect the HDMI signal source (e.g., DVD, STB) to the HDMI input port of the Transmitter.
- Connect a Cat5e or Cat6 cable between the Ethernet port of the Transmitter and the Ethernet port of the Receiver. Ensure the cables follow the EIA-TIA 568B standard.
- Connect the HDMI display (e.g., HD-LCD, HD-DLP) to the HDMI output port of the Receiver.
- Connect the provided DC 5V/1A power adapters to the power input ports of both the Transmitter and Receiver.
- For IR control, connect the IR-TX cable to the IR-TX port on the Transmitter and affix the emitter onto the source device's IR window.
- Connect the IR-RX cable to the IR-RX port on the Receiver and affix the IR receiver in direct line of sight with the handheld remote control, ideally on the display frame or stand.
- For multi-device setups (one-to-many or many-to-many), connect the Transmitter(s) and Receiver(s) to an Ethernet switch or router. In these scenarios, ensure that each TX and RX unit has a different IP and MAC address.
- To set up IP addresses for RX units in a multi-device environment, access the embedded HTTP server via a web browser. The default IP addresses are 192.168.168.55 for TX and 192.168.168.56 for RX.
Maintenance Features
The ENSON HDMI Extender is designed for straightforward maintenance:
- Cleaning: The unit should be cleaned with a soft, dry cloth. Avoid using alcohol, paint thinner, or benzene, as these chemicals can damage the device.
- Product Service: In case of damage or malfunction, servicing should be performed by qualified service personnel. Users are advised not to attempt repairs beyond the scope of the operating instructions.
- Replacement Parts: When replacement parts are needed, ensure that parts specified by the manufacturer or those with equivalent characteristics are used to prevent fire, electric shock, or other hazards.
- Safety Check: After any repairs or service, a safety check should be performed to confirm the unit is in proper working condition.
- Warranty: The product comes with a limited warranty covering defects in materials or workmanship for a specified period (Parts: 2 years, Labor: 90 days). The warranty is valid for the original purchaser and covers products purchased as new, requiring a purchase receipt as proof of date. It does not cover damages from accidents, misuse, improper installation, power surges, or service by unauthorized personnel.
The ENSON HDMI Extender over Ethernet provides a robust and flexible solution for extending HDMI signals in various professional and home environments, offering reliable performance and convenient control options over long distances.
To Next Page
Need help?
General