Insert Effect Parameters
ENSONIQ ASR-X Pro UserÕs Guide 55
Hi Inertia 100ms to 10.0s Determines how long it will take for the horn portion of
the rotor effect to speed up to the fast setting after
switching from slow or vice versa. Adjust this parameter
to simulate the effect of the rotary speaker gradually
picking up speed.
Hi Slow 0.0Hz to 10.0Hz Sets the speed of the horn rotor simulator when
Speed=Slow.
A real organ speaker cabinet has two sets of speakers
(horns & woofer). This parameter is used to set the
hornÕs rate.
Hi Fast 0.0Hz to 10.0Hz Sets the speed of the horn rotor simulator when
Speed=Fast.
Hi FM Min 0 to 100 Sets the amount of detuning for the horn rotor simulator
when the Speed parameter is set to ÒSlow.Ó
Hi FM Max 0 to 100 Sets the amount of detuning for the horn rotor
simulator when the Speed parameter is set to ÒFast.Ó
TheHi FM Min and Hi FM Max parameters can create
ÒDopplerÓ effect.
Hi AM Min 0 to 100 Sets the amount that the horn rotor simulator volume
will change as the speaker rotates when the Speed
parameter is set to ÒSlow.Ó
Hi AM Max 0 to 100 Sets the amount that the horn rotor simulator volume
will change as the speaker rotates when the Speed
parameter is set to ÒFast.Ó Broader ranges between Hi
AM Max and Hi AM Min will create a deeper rotating
speaker effect.
Lo Inertia 100ms to 10.0s Determines how long it will take for the woofer
simulator rotor Speed effect to slow down to the low
setting after switching from Fast or vice versa. Adjust
this parameter to simulate the effect of the rotary
speaker gradually slowing down.
Lo Slow 0.0Hz to 10.0Hz Sets the speed of the bass wooferÕs rotor simulator when
Speed=Slow.
A real organ speaker cabinet has two sets of speakers
(horns & woofer). This parameter is used to set the
wooferÕs rate.
Lo Fast 0.0Hz to 10.0Hz Sets the speed of the bass wooferÕs rotor simulator when
Speed=Fast.
Lo FM Min 0 to 100 Sets the amount of detuning for the woofer rotor
simulator when the Speed parameter is set to ÒSlow.Ó
Lo FM Max 0 to 100 Sets the amount of detuning for the woofer rotor
simulator when the Speed parameter is set to ÒFast.Ó
The Lo FM Min and Lo FM Max parameters can create a
ÒDopplerÓ effect.
Lo AM Min 0 to 100 Sets the amount that the volume of the woofer rotor
simulator will change as the speaker rotates when the
Speed parameter is set to ÒSlow.Ó
Lo AM Max 0 to 100 Sets the amount that the volume of the woofer rotor
simulator will change as the speaker rotates when the
Speed parameter is set to ÒFast.Ó Broader ranges
between these two parameters will create a deeper
rotating speaker effect.
To Next Page
Loading...
