ENSONIQ ZR-76 - Page 65

To Next Page

To Previous Page

Chapter 3ÑGlobal Settings

ENSONIQ ZR-76 Musician's Manual56

When you change any system setting, ZR-76 operations will pause momentarily

to store your settings into FLASH memory.

1. Press the System button.

2. Turn the Parameter knob until the display shows:

System/MIDI:

Edit MIDI settings?

3. Press Yes if youÕd like to change the current system MIDI settings. Press No if youÕd like to cancel

the procedure.

4. Turn the Parameter knob until the display shows:

MIDI Settings:

AllNotesOff Recv= On

The current AllNotesOff Recv value

This AllNotesOff Recv parameter is a combined All Notes Off (MIDI control #123) and All Sounds Off

(MIDI control #120) reception filter. It can be set to:

¥ OffÑthe ZR-76 will ignore the All Notes Off and All Sounds Off MIDI messages.

¥ OnÑwhen SoundFinder or any 16 Track Recorder track receives an All Notes Off and/or All

Sounds Off MIDI message on its MIDI channel, all of its currently sounding notes will be

silenced.

5. Turn the Value knob to set AllNotesOff Recv to the desired value.

The ZR-76 can use MIDI System Exclusive (or ÒSysExÓ) messages to communicate with computersÑthe

Unisyn sound editing software uses this form of communication. SysEx data is a special kind of MIDI

data that doesnÕt require a specific MIDI channel. Every MIDI product has its own SysEx identityÑbut

what if youÕve got several ZR-76s connected at the same time? Each one of them can be assigned its own

SysEx Device ID number, from 000 to 127. In this way, each ZR-76 can identify the MIDI SysEx data that

itÕs meant to receive. Of course, itÕs vital that no two ZR-76s share the same SysEx Device ID number.

ÕÕ

1. Press the System button.

Other manuals for ENSONIQ ZR-76