Need help?Do you have a question about the Ensy AHU-300 HV and is the answer not in the manual?
Details the humidity sensor's switch and operational modes for ventilation control.
Guide to calibrating the integrated humidity sensor's response from 50% to 90%.
Steps for replacing the unit's filters and confirmation via the control panel.
Instructions for qualified personnel on cleaning fan components safely.
Steps for safely removing, cleaning, and reinstalling the rotary heat exchanger.
Overview of the main menu, control buttons, and their indicators.
Explanations of the various icons and symbols displayed on the control panel.
Covers Min/Normal/Max airflow and activating the fan boost function for high humidity.
How to select and adjust temperature set points for heating between 15-21°C.
Details on finding error sources and resetting alarms.
Information on unit's software version for service purposes.
Displays current defrost mode and other general settings.
Guide for setting time and date, crucial for schedules and filter alarms.
How to program daily schedules for fan speed and temperature.
Setting the replacement interval for air filters (6, 9, or 12 months).
Adjusting screen contrast, color, and on-time duration.
Accessing setup menus using a PIN code.
Instructions for turning the reheating coil ON or OFF.
Activating and configuring the cooling recovery function.
Setting supply and extract fan speeds for balanced ventilation.
Connecting and enabling CO2 control for air quality management.
Menu for programming fan speeds based on cooker hood activation.
Connecting external humidity or motion sensors via the D2 connector.
Setting desired values for away/home function activation.
Reading embedded temperature sensors and their calibration status.
How to change the defrost mode based on humidity levels.
Details on how the defrost cycle affects fan speeds and heater.
Assigning control panels as Display 1 or Display 2 for multi-panel systems.
Overview of the unit's capabilities and installation requirements.
Details on suspension brackets and vibration damping for installation.
Steps for attaching ceiling brackets and mounting the unit securely.
Instructions for mounting the unit on a wall using separate brackets.
Guide for mounting the unit directly into concrete ceilings using expansion bolts.
Diagrams showing the unit's dimensions and connector layout.
Diagrams showing the unit's dimensions and connector layout.
Table detailing electrical, thermal, and weight specifications.
Summary of unit features, control systems, and connection points.
Information on extra control panels, pulse switches, and wall brackets.
Guidelines for positioning the control panel for optimal monitoring and regulation.
Role of motion and humidity sensors in regulating ventilation.
Advice on locating air handling units for service and filter access.
Details on connecting external kitchen hoods, stoves, and CO2 sensors.
How to connect the control panel, power, and external sensors.
Guidance on preferred room types and duct placement for the unit.
Instructions for connecting and piping the cooker hood to the unit.
Methods for securely joining duct sections to prevent leaks.
Recommendations for using silencers to minimize noise from the unit.
Guidelines for using flexible ducts for adjustments and connections.
Explains why thermal insulation is necessary for ventilation ducts.
Details on insulating ducts to prevent condensation and heat loss.
Guidelines for placing supply air diffusers and exhaust louvers.
Requirements for cooker hood dampers and connecting the KV plug.
How to adjust supply and exhaust diffuser settings for airflow.
Descriptions of critical alarms, their causes, and reset procedures.
Descriptions of less critical alarms and their reset methods.
Details on rotor fault causes, effects, and potential reset methods.
Guidance on diagnosing and resolving common unit malfunctions.
To Next Page
General
