IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
12-84 Matrix DFE-Platinum and Diamond Series Configuration Guide
12.2.8.8 inservice (real server)
Use this command to enable a real LSNAT server.
inservice
Syntax Description
None.
Command Syntax of the “no” Form
The “no” form of this command removes the real server from service:
no inservice
Command Type
Router command.
Command Mode
SLB Real Server Configuration mode: Matrix>Router1(config-slb-real)#
Command Defaults
None.
Example
This example shows how to enable the real server at IP 10.1.2.3 in the “httpserver” server farm:
Matrix>Router1(config)#ip slb serverfarm httpserver
Matrix>Router1(config-slb-sfarm)#real 10.1.2.3 port 80
Matrix>Router1(config-slb-real)#inservice
To Next Page
Loading...
