Quick Start Manual
MANUAL-DMXIS
for more information visit:
www.enttec.com/dmxis
ENTTEC DMXIS
( P N 7 0 5 7 0 )
Box Contents
• DMXIS (pn: 70570)
• USB Cable (pn: 79110)
• This user manual
• DMXIS App on CD (pn: 79117)
Features
• Full 512 DMX channel universe of output
• Fully compliant with USITT DMX512-A
• USB 2.0 Support on Windows PC and Mac OSX
• 1500 V full isolation (data & power lines to
protect your computer from surges)
• Supports Windows XP/Vista/7/8 and Mac OSX
10.7 or later (drivers released and maintained by
FTDI)
• Hardware style user interface is quick to learn and
easy to use
• Controls any DMX-512 compatible light fixture,
including classic dimmer packs, LED fixtures, and
intelligent lighting (e.g. scanners & moving
heads)
• Create static looks, dynamic chases & moving
effects with smooth cross-fades
• Intuitive tempo-based approach, for perfect
synchronisation of lighting & music
• Runs as a standalone program, VST plug-in, or Audio
Unit plug-in (supported Apps only)
Safety
• Do not expose the DMXIS unit to rain or moisture,
doing this will void the warranty
• Do not remove the cover, there are no serviceable
parts inside
• This unit is intended for indoor use only
• Wherever possible, use with a DMX Splitter for
safety and better reliability with DMX cables.
Basic Setup
• Install and configure the DMXIS software on your
Windows™ or Mac™ computer.
• Connect the DMXIS hardware interface box to your
computer with a USB cable.
• Connect the DMX output (either 3 pin or 5 pin) of
the interface box to the “DMX IN” XLR socket on
your first light fixture
• Connect “DMX OUT” of the first fixture to “DMX IN”
of the next fixture. Continue connecting all
remaining light fixtures together in a daisy-chain
fashion.
• Connect a DMX terminator plug to the DMX OUT of
the last fixture.
1
To Next Page
Need help?
General
