40
EN Installation
The device is supplied packaged on a pallet.
► Align mill
Put the stator with the column onto the desired place and align horizontally by means of the plate
feet.
Use a water-level as supporting instrument.
A
B
C
A. Stator
B. Plate feet
C. Water-level
► Install Cascade
The cascade is screwed tight with 2 screws.
ATTENTION! Tighten the two screws rmly.
A. Fastening screws B. Cascade
A
B
5.3 Installing a mill wheel with the sauna heater
To Next Page
Loading...