EasyManua.ls Logo

EOS Mini - Page 14

EOS Mini
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
EN Installation
3. To ensure an even distribution of the water even distribution of the water, align the gutter
with the water-level
A
A. Water-level
5.4 Set up fixed water connections
NOTICE
Contaminaton of drinking water
The regulations of EN 1717 and/or DIN 1988 Part 4 must be attended. Appropriate meas-
ures must be taken that prevent the water from running back into the drinking water pipe-
line. For this, especially pipe isolators or system isolators are appropriate.
If necessary, ask your drinking water supply company or your local sanitary
expert.
Connect fixed water connection with water system on-site.
NOTICE
Between xed water system and xed water connection a shut-o cock must be installed.
In case the xed water connection will not be used for any length of time, the
shut-o cock is to be closed.
The stopcock allows the water supply to be quickly disconnected for mainte-
nance and repairs.
Maximum operating pressure 10 bar