www.epicactioncam.com
User’s Manual
V2.0 1/13
www.epicactioncam.com
2
OVERVIEW ................................................................................ 3
INITIAL SET UP .......................................................................... 4
Installing & Removing SD Memory Card .............................. 4
Installing & Removing Batteries............................................. 5
“HOW TO” - INSTRUCTIONS ..................................................... 7
Power ON/OFF ..................................................................... 7
Shoot a Video ....................................................................... 7
Battery Low .......................................................................... 8
DOWNLOADING ........................................................................ 9
USB Connection ................................................................... 9
Card Reader ......................................................................... 9
VIEWING LIVE VIDEO ................................................................ 10
TV Live Mode ....................................................................... 10
EPIC Viewer ........................................................................ 10
PLAYBACK MODE ..................................................................... 10
MOUNTING OPTIONS................................................................ 11
SYSTEM REQUIREMENTS ........................................................ 13
WARRANTY / CONTACT INFO ................................................. 14
FCC COMPLIANCE .................................................................... 15
www.epicactioncam.com
3
*** IMPORTANT ***
To ensure optimum performance; your EPIC camera may be eligible for
periodical free software updates.
Please go to www.epicactioncam.com to register your new camera and
check for the latest firmware downloads & sign up for our weekly
newsletter to stay informed on updates, new product news and free
giveaways. Also visit us on Facebook, Twitter and Youtube.
Overview
Camera Remote Controller
www.epicactioncam.com
4
Initial Setup
INSTALLING SD MEMORY CARD
1. Make sure the camera is power off before adding or removing
memory.
2. Push open the USB/TV/SD door located at the rear of the camera.
(Figure 1.1)
3. Install a 2, 4, 8, 16 or 32GB SD memory card into the rear slot.
Make sure memory card is firmly seated into the camera by
pushing the card until you hear a slight click. Then close the rear
door. (Figure 1.2)
4. SD memory cards must be clean (no images from other sources). If
you are using the SD memory card from other cameras, please
make sure to format the SD memory card in your computer prior to
use in the camera. New cards are good to use straight from the
package.
REMOVING SD MEMORY CARD
1. Make sure the camera is power off before adding or removing
memory!
2. Push open the USB/TV/SD door located at the rear of the camera.
(Figure 1.1)
3. Push in on the SD memory card gently until you hear a slight click,
card should pop out for easy removal.
To Next Page
Need help?
General
