ePropulsion eLite Quick Start

eLite Quick Start
Before rst use, please ensure that you have read the user manual and thoroughly understand
the potential risks related to the operation of the equipment.
Before rst use, please fully charge the outboard motor.
Warning:
• Please always wear a life jacket before boating, and tie the kill switch lanyard to your wrist or
life jacket.
• Before each trip, always check the status of the outboard motor and the battery level.
• After use, please remove the kill switch, press and hold the power button for 2 seconds to turn
off the motor. All parts of the outboard that have been underwater, or splashed, should be
rinsed with fresh water after each use.
Display
Power Button
USB Type-C Output
Charging Port
Throttle
Kill Switch
Tiller Extension Relsase
Tiller
Bracket Disassemble
Button
Quick Release Mount
Propeller
Tiller Angle
Adjustment Toggle
Tightening Handle
Clamp Bracket
Trim Pin
Clamp Damping Shaft
Tilt Release Lever
Beaching Lever
1 2 3
4
A
B
3 2 1
B
A
C
D
C
g
单位:mm
Guangdong ePropulsion Technology Limited
广东逸动科技有限公司
4
Display
Tiller Angle
Adjustment Toggle
Bracket Disassemble
Button
Throttle
Trim Pin
Clamp Bracket
Charging Port
USB Type-C Output
Kill Switch
User Manual Operation Video

ePropulsion eLite Specifications

General

Brand	ePropulsion
Model	eLite
Category	Outboard Motor
Language	English