Epson 2200 - Stylus Photo Color Inkjet Printer - Page 192

EPSON Stylus PHOTO 2100/2200 Revision B
ADJUSTMENT Adjustment Items and Overview 192
Table 5-4. Check Pattern Printing
Function Item Purpose Adjustment Outline Tool
Used
Media
Others
EEPROM DUMP
function
This function is used to analyze a faulty product. Set and read the corresponding address of the EEPROM. Write the specific
value to the corresponding address as required.
Exclusive servicing
program
Non-target
Paper passing test This function is used to make a reproduction test or
operation check.
Up to 100 pieces of paper can be set for continuous passage. Exclusive servicing
program
Non-target
Printer information
read
This function is used to analyze a faulty product.
This function reads and displays the fundamental
information that indicates the operating status of the
printer.
• Cumulative print page read
• Cumulative print path read
• Each CL execution count read
• Initial charge execution count read
• Cutter cut count read
Exclusive servicing
program
Non-target
EEPROM reset This function makes a reset that is equivalent to the
EEPROM reset function from the panel.
The following EEPROM address values are reset.
26<h> − 27<h> Last Cleaninig Time
28<h> − 29<h> Power Off Time
44<h> Interface Selection
Exclusive servicing
program
Non-target