EPSON Stylus PHOTO 2100/2200 Revision B
PRODUCTION DESCRIPTION Functions 30
1.3.7 Status Printing
PRINTING METHOD
!
Printing using remote command
Use the NC command of the remote commands.
! Status printing
Hold down the Paper switch and switch power on.
! Printing using D4 control command
On the D4 command channel, send the "nc" command.
PRINTING RESULT DETAILS
NOTE: The values above the lines indicate nozzle numbers and are not printed
actually.
NOTE: Differences between the character strings printed in panel Nozzle Check
pattern and driver Nozzle Check pattern (For the driver, the firmware
version and CPU mask version are also printed at top left of the print
result paper.)
Figure 1-14. Printed Character Strings
Firmware version
Code table
CPU mask version
Waste counter
value
EL071C IO301A 0490
PC437
To Next Page
Loading...
