EPSON Stylus Pro 3800/3800C/3850 Revision A
ADJUSTMENT Overview 194
CHECK RESULTS
RESET COUNTERS
Check the Release Of Grid Roller Checks the release operation of the grid roller. --- P. 235
Check Network Communication Checks if the printer is recognized over a network. --- P. 236
T&B&S Adjustment Adjusts the position to start printing on the paper.
--- P. 237
PF Adjustment Adjusts a pitch of paper feeding during printing except for printing on the bottom area. --- P. 239
EJ Adjustment Adjusts a pitch of paper feeding during printing on the bottom area.
--- P. 241
Check Ink Selector Operation. Checks the switching operation between the Photo Black and the Matte Black. --- P. 243
Write Constant When CR change Stores characteristic values of the CR Motor into the NVRAM in order to apply an appropriate current to the motor.
--- P. 244
Adjustment General Overview
Tool
Page
AU*
1
AT*
2
Check Nozzle Checks the nozzles for clogging.
--- P. 245
Print Image Prints an image to check the print quality.
--- P. 246
Print Results Prints all adjustment parameters, life counters, and error histories stored on the NVRAM.
--- P. 247
Check Alignment Checks for any mis-alignment.
--- P. 248
Adjustment General Overview
Tool
Page
AU*
1
AT*
2
Reset When Cleaning Unit Change
Resets life counter of the PUMP, CAP, ASSY.
---
P. 249
Reset When Print Head Change
Resets life counter of the PRINT HEAD
---
Reset When Pump Motor Change Resets life counter of the PUMP, CAP, ASSY. ---
Reset When INK SYSTEM ASSY Change Resets life counter of the INK SYSTEM ASSY. ---
Reset When Ink Holder Waste Absorber Change Resets life counter of the POROUS PAD, TRAY, INK EJECT.
---
Reset When Borderless Absorber Change Resets life counter of the POROUS PAD, INK WASTE BOX, RIGHT/LEFT. ---
Reset When CR Motor Change Resets life counter of the MOTOR ASSY., CR.
---
Reset When ASF Unit Change Resets life counter of the ASF, ASSY. ---
Adjustment General Overview
Tool
Page
AU*
1
AT*
2
To Next Page
Loading...
