EPSON Stylus Pro 3800/3800C/3850 Revision A
ADJUSTMENT Overview 196
5.1.7 Adjustment Program Basic Operations
This section describes the basic operations of the Adjustment Program.
System Requirements
OS: Windows 2000, XP
Interface: USB
The printer driver must have been installed.
Startup
When you start the Adjustment program for this printer, the NVRAM Backup
Utility will automatically start up. Unless carrying out parameter writing, execute
parameter reading before carrying out the adjustments. For operation of the
NVRAM Backup Utility, see "5.3.6 Parameter Backup" (Page 212).
1. Double-click on “adjwiz2.exe”, to start the NVRAM Backup Utility.
2. See "5.3.6 Parameter Backup" (Page 212) to execute parameter backup, and
complete the NVRAM Backup Utility.
3. The startup screen of the Adjustment Program appears. Select whether to
carry out the adjustments in Sequential Mode or Individual Mode.
4. Click [Start].
Figure 5-1. Adjustment Program Startup Screen
To Next Page
Loading...
