EPSON Stylus Pro 3800/3800C/3850 Revision A
MAINTENANCE Lubrication 257
[Lubrication 5] [Lubrication 6]
Part Name
Spur Gear, 22, B
(SHAFT, RELEASE, ASSY.)
Lubrication Point 1. On the
Spur Gear, 22, B with where the FRAME, ASSY., MAIN
contacts.
2. On the
Spur Gear, 22, B with where the washer contacts.
3. On the gear tooth of the
Spur Gear, 22, B
Lubricants G-26
Amount 1.
I2 mm x all around x 1 point
2. I2 mm x all around x 1 point
3.
I2 mm x 2 mm x 1 point
Remarks Apply with a syringe. (Pin head:
I2 mm)
Washer
Spur Gear, 22, B
Lubrication
Point 1
Lubrication
Point 2
Lubrication
Point 3
Part Name HOLDER, ROLLER, SUPPORT, L
(SHAFT, RELEASE, ASSY)
Lubrication Point On the HOLDER, ROLLER, SUPPORT, L with where the SHAFT,
RELEASE, PAPER GUIDE, UPPER contacts
Lubricants G-26
Amount 1.
I2 mm x 2 mm x 2 points
2. I2 mm x 2 mm x 2 points x 5 points
Remarks Apply with a syringe. (Pin head:
I2 mm)
HOLDER, ROLLER, SUPPORT, L
Lubrication Point 1Lubrication Point 2
To Next Page
Loading...
