Epson AcuLaser C1900 - Page 67

EPSON AcuLaser C1900/AcuLaser C900 Revision B
Product Description Control Panel 67
3. On the dialog screen for confirmation, click the “OK” button to execute EEPROM
initialization.
TRANSFER VOLTAGE OFFSET SETTING
1. Open the “Optional Settings” page of the printer driver.
2. While pressing the [ALT] + [CTRL] + “Z” keys together on the Keyboard, click the
“Printer Setting” button.
Figure 1-10. Transfer Voltage Offset Setting Screen
C A U T I O N
Once you execute this operation, the cumulative number of
printed sheets and the cumulative replacement counts of toner
cartridges and photoconductor unit will be reset to zero.
Remember this before executing this operation.
Click while pressing
[ALT] + [CTRL] + “Z”