1 - 172
Chapter 1 Troubleshooting
Epson AcuLaser C2900N
Revision B
Confidential
FIP-1.P22 Label Stuck
.Possible causative parts
- FUSER UNIT (PL6.1.1)
Before commencing troubleshooting, check the paper transfer path. Make sure there is no foreign
materials on the transfer path, such as staples, paper clips, scraps of paper and so on.
Step Check
Remedy
Yes No
1
Checking for foreign materials around the paper transfer
path.
Are there any foreign materials such as precut adhesive
labels in the paper transfer path?
Remove the
foreign materials.
Warning: Start the
operation after the
fuser unit has
cooled down.
Replace the fuser
unit. (Refer to
RRP6.1.) After
replacement, be
sure to clear the
life counter value.
To Next Page
Loading...
