3 - 1
Chapter 3 Removal and Replacement Procedures
Epson AcuLaser C2900N
Revision B
Confidential
1. Removal and Replacement Procedures (RRPs)
Parts removal and replacement procedures are described in major 10 items which correspond to classi-
fication of parts list.
∗RRP 1 COVERS
∗RRP 2 PAPER CASSETTE
∗RRP 3 PAPER FEEDER
*RRP 4 XEROGRAPHICS
*RRP 5 DISPENSER
*RRP 6 TRANSFER & FUSER
*RRP 7 DRIVE
*RRP 8 ELECTRICAL
*RRP 9 DUPLEX
*RRP 10 250 OPTION FEEDER
When working on an item which is controlled as a spare part but the procedure therefore
is not described, observe carefully how the part is attached before removing the item.
As a general rule, optional items are assumed to be removed from the equipment. How-
ever, you may work with optional items attached if it does not disturb your work.
To Next Page
Loading...
