Chapter 3 Removal and Replacement Procedures Revision B
Epson AcuLaser C2900N 3 - 23 Confidential
[Replacement]
1) Lift the COVER ASSY FRONT MG
slightly up to attach it to the printer.
2) Mate the flat face of the SHAFT PIVOT
with the hole of the COVER ASSY FRONT
MG, push the SHAFT PIVOT until the hook
is locked.
3) Mate the flat face of the SHAFT LINK
FRONT FDR with the hole of the COVER
ASSY FRONT MG, push the SHAFT LINK
FRONT FDR until the hook is locked.
To Next Page
Loading...
