Settings for NetWare Server
121
7
7
7
7
7
7
7
7
7
7
7
7
12. From the printer object list, select the printer object you want
to assign and click
OK
.
13. Go back to the screen in step 11, and click the
Printer Number
button to set the printer number from 0 to 254.
14. To confirm the objects you have assigned, double-click the
PrintServerobjecticon.Click
Print Layout
, and check that the
print server, printer, and print queue are connected.
Configuring the Internal Print Server with EpsonNet WinAssist
1. Turn on your printer.
2. Load the print server from the file server’ssystemconsole
which the print queue volume is set.
>LOAD PSERVER print server name you set using
NWAdmin
3. Configure the Internal Print Server using EpsonNet
WinAssist. See “Configuring Your Printer Using EpsonNet
WinAssist” on page 43 for details.
If you use the NetWare objects that are already created, you
can use EpsonNet WebAssist too. See “NetWare” on page 195
for details.
To Next Page
Loading...
