EpsonNet Internet Print
165
10
10
10
10
10
10
10
10
10
10
10
10
Port Number:
Enter the port number of the proxy server (from 0 to 65535).
Get Printer Attributes:
When you select this box and click
OK
, EpsonNet Internet
Print communicates with the printer and acquires
information, so it may take a few minutes before a message
appears. This setting is available only when creating a port.
Get status every 20 sec.:
Select this box when you want to receive printer status
updates at regular intervals (every 5 seconds during printing
and every 20 seconds when idle). If you select this box, a
message will appear if an error occurs during printing. You
canalso check the printerstatusby double-clicking theprinter
icon.
OK button:
Saves the settings.
Cancel button:
Cancels any changes.
Note:
❏
The settings you make above can be changed from the printer
driver. In the printer Properties dialog box, click the Details
tab, and click the Port Settings button to change the settings.
❏
Be aware that when connecting to the Internet using a dial-up
router and selecting the Get status every 20 sec check box,
you may be charged for the extra line connection.
❏
When you check the Get Printer Attributes check box and click
OK, an error message may appear. Be sure that the printer
powerison,andtheprinteriscorrectlyconnectedonthe
network.
To Next Page
Loading...
