176
EpsonNet WebAssist
Note:
If you want to configure other than TCP/IP, see “Configuration -
Network Screens” on page 195.
4. Select the “Get IP address” method. When you select Auto,
DHCP becomes available and assigns an IP address
automatically. If you want to set the IP address manually,
select Manual.
Note:
❏ Thenetworkadministratormustconfirmanychangesmadeto
theIPaddresssettings.
❏ The default is Auto.WhenAuto is selected, DHCP becomes
available. To use the DHCP server, it must be installed on your
computerandcorrectlyconfigured. See youroperating system’s
online help for detailed instructions.
❏ If there are no DHCP servers on your system or on your
network, the Internal Print Server uses “192.168.192.168” as
the default IP address.
To Next Page
Loading...
