44
EpsonNet WinAssist Configuration Utility
For Windows Me/98/95/2000/NT 4.0:
Click Start, point to Programs, and then select EpsonNet
WinAssist.ClickEpsonNet WinAssist.
For Windows NT 3.51:
Double-click the EpsonNet WinAssist icon in the EpsonNet
WinAssist group.
4. Select All or your preferred protocol on the left side of screen.
5. Select the printer you want to configure, and then click
Configuration or double-click the printer icon.
Note:
❏ If the same printer model name appears multiple times in the
list, you can distinguish the printers by their MAC address,
which are found on a network status sheet.
❏ You can search printers in other segments by setting the
Search Options from the Tool menu. See “Search options” on
page 65 for more information.
❏ The Launch Browser button can be used only if a valid IP
address is assigned to the printer.
6. Click the TCP/IP tab to display the TCP/IP menu.
To Next Page
Loading...
