EpsonNet WinAssist Configuration Utility
45
4
4
4
4
4
4
4
4
4
4
4
4
Note:
If you want to configure a protocol other than TCP/IP, see “Details
of the Configuration Dialog Box” on page 49.
7. Select the “Get IP address” method. If you select
Auto
,DHCP
becomes available and assigns an IP address automatically. If
you select
Manual
, you can enter the IP address manually.
Note:
❏
The default is Auto.WhenAuto is selected, DHCP becomes
available. To use the DHCP server, make sure it is installed on
your computer and configured correctly. See your operating
system’s online help for detailed instructions.
To Next Page
Loading...
