48
EpsonNet WinAssist Configuration Utility
1. To set a password or to change the current password, click
Change.
2. In the Administrator password dialog box, enter a password
(up to 20 characters) and click OK. Passwords are case
sensitive.
Note:
❏ ThesamepasswordisusedforEpsonNetWinAssist,
MacAssist, and WebAssist.
❏ Since the new password becomes effective after sending the data
tothe InternalPrint Server, enter theold password immediately
after changing the password.
❏ If you forget your password, you need to initialize the Internal
Print Server. See “Initializing Your Printer” on page 13 for
instructions.
To Next Page
Loading...
