54
EpsonNet WinAssist Configuration Utility
Note:
You can make queue settings for a higher context than the context you
specified in the NDS context box. In this case, you must have a
supervisor privileges for the context in which you set the queue.
❏ Selecting a queue
Click the queue and click OK to select the queue.
Items Explanations
Queue name Displays the queue name that is assigned to the
print server by browsing the queue.
Browse Click the Browse button to select a queue. You
can also create or delete a queue.
Queue list box Lists the print queues.
Add Adds a print queue.
Remove Removes a print queue.
OK Updates the settings.
Cancel Cancels any changes.
To Next Page
Loading...
