70
EpsonNet MacAssist Configuration Utility
1. Insert the software CD-ROM in the CD-ROM drive.
2. The disk icon opens automatically. If the disk icon does not
open automatically, double-click the disk icon. Then,
double-click the EpsonNet MacAssist folder.
3. Drag the EpsonNet MacAssist icon to your hard disk.
To start EpsonNet MacAssist, double-click the EpsonNet
MacAssist icon on your hard disk.
Configuring Your Printer Using EpsonNet
MacAssist
Use EpsonNet MacAssist to configure the Internal Print Server as
described below.
1. Turn on your printer.
2. Double-click the EpsonNet MacAssist icon.
3. Select the printer you want to configure from the list and click
Configuration.
To Next Page
Loading...
