Epson Aculaser C9200N - Page 219

EPSON AcuLaser C9200N Revision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 219
Confidential
3. Snap off the E-ring [4] and remove the Bearing [5].
4. Snap off two C-ring [6], and remove the Bearing [7].
4038F2C006DB
[4]
[5]
[9]
[8]
4038F2C007DB
[7]
[6]
5. Remove the Feed Roller [8].
A D J U S T M E N T
R E Q U I R E D
When installing the Feed Roller with a new one, make sure to reset the life counter.
(Refer to Chapter 5 “ADJUSTMENT”) (p313))
4038F2C008DB
[8]