Epson Aculaser C9200N - Page 336

EPSON AcuLaser C9200N Revision D
MAINTENANCE Cleaning 336
Confidential
DUPLEX UNIT
 Transport roller
Gently wipe the rubber part of the feed roller with a well-wrung cloth.
Figure 6-13. Cleaning the transport roller
 Ventilation Section (Outside)
Wipe the outside of the ventilation section clean of dirt.
Figure 6-14. Cleaning the ventilation section (Outside)
 Ventilation Section (Inside)
Wipe the inside of the ventilation section clean of dirt.
Figure 6-15. Cleaning the ventilation section (Inside)