Epson AcuLaser CX11 - Adf Cover R; ADF Section

EPSON AcuLaser CX11/CX11F Revision B
DISASSEMBLY AND ASSEMBLY ADF Section 492
4.4 ADF Section
4.4.1 COVER
4.4.1.1 ADF COVER R
REMOVAL
1. Remove the Scanner. (p306)
2. Remove the ADF Unit. (p481)
3. Turn the ADF Unit over, remove the two screws (M3 x 8 mm, P-type, A-head) that
secure the HOOK FIX PLATE to the SDH COVER, and remove the HOOK FIX
PLATE from the SDH COVER. See Figure 4-171.
4. Turn the ADF Unit back to the normal orientation, open the ADF COVER C, and
remove the screw (M3 x 8 mm, S-type, A-head) that secures the ADF COVER R.
See Figure 4-172.
5. Release the seven tabs of the ADF COVER R from the SDH COVER in the order
shown in , and remove the ADF COVER R. See Figure 4-173.
Figure 4-171. Removal of HOOK FIX PLATE
Figure 4-172. Removal of ADF COVER R (1)
Figure 4-173. Removal of ADF COVER R (2)
C H E C K
P O I N T
To release the seven tabs, push them with a flat-blade screwdriver or
similar tool toward the direction shown in
Figure 4-173 .
HOOK FIX PLATE
SDH COVER
3)
ADF COVER C
4)-2
4)-1
7
Notch
Tab
3
Notch
Tab
Obverse Side
ADF COVER R
ADF HINGEReverse Side ADF HINGE
1
2
5
6
4
Tab
manuals4you.commanuals4you.com