Epson AcuLaser CX16 - Page 100

Item Description
Authentication Method Select the authentication method used for logging on to the LDAP server.
If “Anonymous” is selected, a user name and password are not necessary.
If “Simple” is selected, a user name and password are necessary.
If “Digest-MD5” is selected, use with a general LDAP server.
If “GSS-SPNEGO” is selected, use with Active Directory in Windows.
Choices Anonymous, Simple, Digest-MD5, GSS-SPNEGO
Default Anonymous
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - AUTHENTICATION
LDAP Account Specify the account used to connect to the LDAP server.
Range Up to 64 characters
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - LDAP ACCOUNT
Password Specify the password used to connect to the LDAP server.
Range Up to 32 characters
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - LDAP PASSWORD
Domain Name Specify the necessary domain name used to connect to the LDAP server.
Range Up to 64 characters
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - DOMAIN NAME
Apply button Applies the configuration settings in this window.
Cancel button Resets all configuration settings to previous values.
Note:
When an LDAP server is used, the correct search results may not be retrieved when the search is
performed from a server using anonymous access.
AcuLaser CX16NF Reference Guide
Using Web-Based EpsonNet Config 100