Item Description
Login Name Type in the user name used for authentication with POP3 server.
Range Up to 63 characters
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - E-MAIL SETTING - POP BEFORE SMTP - POP3 ACCOUNT
Password Type in the password used for authentication with POP3 server.
Range Up to 15 characters
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - E-MAIL SETTING - POP BEFORE SMTP - POP3 PASS-
WORD
SMTP Authentication If “Enable” is selected, SMTP Authentication is enabled.
Choices Enable, Disable
Default Disable
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - E-MAIL SETTING - SMTP AUTH. - DISABLE/ENABLE
User Name Type in the user name used for authentication with SMTP Authentication.
Range Up to 63 characters
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - E-MAIL SETTING - SMTP AUTH. - SMTP USER NAME
Password Type in the password used for authentication with SMTP Authentication.
Range Up to 15 characters
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - E-MAIL SETTING - SMTP AUTH. - SMTP PASSWORD
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings for this window to their user defaults.
Note:
Use alphanumeric characters (including some symbols) for the Sender Name and Default Subject. Using
other characters will corrupt the characters for the E-mail destination. For details on characters that can
be entered, refer to the User’s Guide.
AcuLaser CX16NF Reference Guide
Using Web-Based EpsonNet Config 107
To Next Page
Loading...
Need help?
General
