Epson Artisan 725 - Page 295

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD Revision G
Artisan 837/730/PX830FWD/PX730WD/TX730WD Disassembly/assembly 295
Confidential
3. Remove the screws (x9) that secure the Upper Housing.
Figure 9-8. Removing the Upper Housing (2)
4. Remove the screws (x2) that secure the Panel Unit.
Figure 9-9. Removing the Upper Housing (3)
5. Lift the Panel Unit until the screw (x1) under the Right Hinge can be seen, and
remove the screw (x1).
Figure 9-10. Removing the Upper Housing (4)
6. Release the ribs (x3) and hook (x1) of the Upper Housing. (See Fig. 9-8.)
7. Lift the Upper Housing slightly and disconnect the Panel FFC from the Main
Board, and remove the Upper Housing together with the Panel Unit.
Figure 9-11. Removing the Upper Housing (5)
8. Remove the Decoration Plate Left Upper from the Upper Housing.
(See "9.4.2.3 Decoration Plate Left Upper" (p.296).)
9. Remove the Panel Unit from the Upper Housing.
(See "9.4.2.10 Panel Unit" (p.302).)
1
2
3
4
5
8
6
9
C.B.S. 3x6 (8±1Kgfcm)
C.B.S. 3x8 (8±1Kgfcm)
C.B.A. 3x8 (6±1Kgfcm)
C.B.P. 3x10 (6±1Kgfcm)
Upper Housing
Left Housing
Right Housing
7
Rib
Hook
Panel Unit
C.B.P. 3x10 (6±1Kgfcm)
Right Hinge
C.B.P. 3x12 (8±1Kgfcm)
Panel FFC
Main Board
Upper Housing