Epson B11B259201 User Manual

Controlling protocols
Congure the protocol settings supported by the scanner.
1.
Access Web Cong and then select the Network Security tab > Protocol.
2.
Congure
each item.
3.
Click Next.
4.
Click OK.
e settings are applied to the scanner.
Related Information
& “Running Web Cong on a Web Browser” on page 23
Protocols you can Enable or Disable
Protocol Description
Bonjour Settings You can specify whether to use Bonjour. Bonjour is used to search for devices, scan, and so on.
SLP Settings You can enable or disable the SLP function. SLP is used for push scanning and network
searching in EpsonNet
Cong
.
WSD Settings You can enable or disable the WSD function. When this is enabled, you can add WSD devices,
and scan from the WSD port.
LLTD Settings You can enable or disable the LLTD function. When this is enabled, it is displayed on the
Windows network map.
LLMNR Settings You can enable or disable the LLMNR function. When this is enabled, you can use name
resolution without NetBIOS even if you cannot use DNS.
SNMPv1/v2c Settings You can specify whether or not to enable SNMPv1/v2c. This is used to set up devices,
monitoring, and so on.
SNMPv3 Settings You can specify whether or not to enable SNMPv3. This is used to set up encrypted devices,
monitoring, etc.
Protocol Setting Items
Bonjour Settings
Items Setting value and Description
Use Bonjour Select this to search for or use devices through Bonjour.
Bonjour Name Displays the Bonjour name.
Bonjour Service Name Displays the Bonjour service name.
Location Displays the Bonjour location name.
Administrator Information > Advanced Security Settings > Controlling Using Protocols
222

Epson B11B259201 Specifications

General

Brand	Epson
Model	B11B259201
Category	Scanner
Language	English