Epson BrightLink 1485Fi - Projector Keyword; Interrupt Connection; ECO Menu; Firmware Update

Details of Updated Projector Menus (Version 1.50)
11
Projector Keyword
The Projector Keyword setting is moved to the Network Projection setting
from the Epson iProjection setting.
Previous Network Settings Menu (Version 1.00)
Top menu Sub menu Items or setting values
Network Settings Network Projection Epson iProjection
• Projector Keyword
New Network Settings Menu (Version 1.50)
Top menu Sub menu Items or setting values
Network Settings Network Projection Projector Keyword
Epson iProjection
Interrupt Connection
The Interrupt Connection setting is added to the Screen Mirroring setting.
Previous Network Settings Menu (Version 1.00)
No setting is available.
New Network Settings Menu (Version 1.50)
Top menu Sub menu Items or setting values
Network Settings Network Projection Screen Mirroring
• Interrupt Connection
Interrupt Connection lets you connect to another mobile device during
Screen Mirroring projection or to exclusively connect to one device. If you
want to use two Screen Mirroring sources, set this to Off.
ECO Menu
The Sleep Mode Timer and A/V Mute Timer settings are added.
Previous ECO Menu (Version 1.00)
Top menu Sub menu Items or setting values
ECO Sleep Mode —
New ECO Menu (Version 1.50)
Top menu Sub menu Items or setting values
ECO Sleep Mode —
Sleep Mode Timer —
A/V Mute Timer —
See the Operation menu table in your User's Guide for details on the settings.
Firmware Update
The Firmware Update setting is added.
Previous Initial/All Settings Menu (Version 1.00)
Top menu Sub menu Items or setting values
Initial/All Settings Reset All —
New Initial/All Settings Menu (Version 1.50)
Top menu Sub menu Items or setting values
Initial/All Settings Reset All —
Firmware Update —