2 Introduction
Introduction
Your BrightLink
™
455Wi+ projector turns any wall into an interactive
whiteboard. After your projector has been installed, read this booklet to:
■ Install the software on your computer
■ Connect the cables to your computer
■ Use the remote control
■ Turn on the projector and adjust the image
■ Launch the Easy Interactive Driver
■ Calibrate and use the pen
■ Use Easy Interactive Tools
■ Solve basic problems
This booklet explains how to use the projector with a laptop or other computer.
You can also connect the projector to video players, document cameras, or other
equipment. For additional information, see the on-screen User’s Guide included
on the BrightLink 455Wi+ CD. For network information, see the on-screen
EasyMP
®
Network Projection Operation Guide also included on the BrightLink
455Wi+ CD.
Before using the projector, make sure you read the safety instructions in the on-
screen User’s Guide on the projector CD.
Please follow these guidelines as you read your projector instructions:
Warning:
Warnings must be followed carefully to avoid bodily injury.
Caution:
Cautions must be observed to avoid damage to your equipment.
Note:
Notes contain important information about your projector.
To Next Page
Loading...
