Quick Projector Setup 3
Quick Projector Setup
Follow the steps on pages 4 and 5 to get up and running fast. Copy these pages,
laminate if necessary, and keep with the projector as a “cheat sheet.” If you need
more detail, turn to the page listed for each step.
1. Install the Easy Interactive Driver and Easy Interactive Tools (see page 6). Use
the CDs “Epson Projector Software for Easy Interactive Function” and
“BrightLink 455Wi+, that came with the projector, or download from:
www.latin.epson.com/proyectores (English and Spanish) or
www.suporte-epson.com.br (Portuguese)
2. Make sure the batteries are installed in the interactive
pen and remote control (see pages 8 and 9).
Press the button on the pen. If the light turns green,
the batteries are installed and charged.
3. For the best type of connection, connect a
VGA computer cable (optional) and the
USB cable included with the projector to
your PC or Mac
®
(see page 10).
4. Turn on the projector by pressing the P power button on the remote control
(see page 11). If you need to adjust the image, see page 12.
5. Display an image from your computer. If the image doesn’t appear, see
page 36 or try one of the following:
■ On some PC laptops, you may need to hold down the Fn key on the
keyboard and press
F7 or the function key that lets you display on an
external monitor. It may have an icon such as , or it may be labelled
CRT/LCD.
■ On a MacBook
®
, you may need to open your Display Preferences and
select
Detect Displays, Show displays in menu bar, or Mirror
Displays
.
Power
button
To Next Page
Loading...
