Epson BrightLink 455Wi - Calibrating the Projector (Continued); Starting the Calibration Process; Performing Calibration Steps

6 Getting Started
Getting Started
Before you can use your interactive projector, you need to install the software and
connect the cables to your computer. Then you can turn on the projector and
calibrate.
Installing the Software
This section explains how to install the software for the interactive pen and your
on-screen manuals.
Periodically, it’s a good idea to check Epson’s support website for free updates to
your Easy Interactive software. Visit www.latin.epson.com/proyectores or
www.suporte-epson.com.br.
Even if you have annotation software, you must install the Easy Interactive Driver
from the CD labeled “Epson Projector Software for Easy Interactive Function.”
Installing the Easy Interactive Driver
1. Insert the CD labeled “Epson Projector Software for Easy Interactive
Function” in your computer.
Windows: If you see the AutoPlay window, click
Run
EIDriverVxxx_Setup.exe
. If you see a User Account Control screen,
click
Continue or Yes.
Mac OS X: Double-click
EIDriverVxxx_Setup in the Epson window.
2. Select your language, if necessary.
3. Follow the on-screen instructions to install the software.