8 Getting Started
Note: You can also visit the following website to download Easy Interactive Tools:
www.latin.epson.com/proyectores (English and Spanish)
www.suporte-epson.com.br (Portuguese)
Installing the Pen Batteries
Make sure the pen batteries are installed. To check the batteries, press the button.
If the indicator light is green, the batteries have enough power.
It’s a good idea to attach a commercially-available cord or lanyard to the pen.
If you need to install or replace the batteries, use two rechargeable or alkaline AAA
batteries. If you have a battery charger, you can also use rechargeable AAA
batteries. Do not mix the two battery types.
1. Press in the tab on the battery cover as you lift the cover off.
2. Install two batteries, inserting the
+ and – ends as shown.
Battery indicator
light
Button
Cord
attachment
slot
To Next Page
Loading...
