10 Getting Started
Connecting the Cables
You can connect the projector to any computer that has a standard monitor out
port using a VGA computer, which you can purchase from a computer or
electronics store.
In addition, you must connect the USB cable before you can use the interactive
pen. If the cable is not long enough to reach your computer, you may need to use
a USB booster cable (not included).
You can also project through the USB port (USB display) or through a network.
However, the VGA monitor out port on your computer provides the best
performance when used with the interactive pen.
Connecting the VGA Computer
Cable
1. Locate the VGA computer cable connected
to the projector.
2. Connect the other end of the cable to your
computer’s monitor out port.
Connecting the USB Cable for the Interactive Pen
In order to use the interactive pen, you must connect the USB cable to the
projector and your computer.
1. Locate the USB cable connected to the projector.
VGA computer cable
USB cable
To Next Page
Loading...
