Turning the Projector On and Off 11
2. Connect the flat end of the cable to
any available USB port on
your notebook or desktop
computer.
Turning the Projector On and Off
Before you turn on the projector, turn on your computer.
1. Make sure the projector is plugged in. The Ppower light should be orange.
2. Press the Ppower button on the remote control.
After a few moments, you should see your computer desktop displayed. If you
see a blank screen or the
No signal message, see page 36 for help.
Warning: Never look into the lens when the lamp is on. This can damage your
eyes, and is especially dangerous for children.
Power light
Power
button
To Next Page
Loading...
