12 Getting Started
3. When you’re finished using the projector, press the Ppower button on the
remote control.
4. When you see a confirmation message, press the Ppower button again.
Note: Lamp life will vary depending upon mode selected, environmental conditions,
and usage. Turn off this product when not in use to prolong the life of the projector.
The projector can be set to automatically turn off the lamp and enter “sleep mode”
when it has not received any signals for 1 to 30 minutes (see your on-screen User’s
Guide for details). This conserves electricity, cools the projector, and extends the life of
the lamp. If you want to start projecting again, press the P power button.
Adjusting the Image
If necessary, you can use the remote control buttons to adjust the image:
Temporarily turn off image
Adjust image
position and quality
Change aspect ratio
(screen size)
Adjust color for different
viewing environments
Access menu system for
additional adjustments
Select from various image
sources connected to the
projector
Select the image
source to display
Page through documents
Zoom in and out
To Next Page
Loading...
